不得在已裝置的鐵藝護欄上使用灰漿和包層.為了避免污染,在穿插操作過程中,鐵藝護欄應掩蓋保護膜.再一次,鐵柵欄被裝置清潔外表,修正劃痕,并保證外表光潔.

It is not allowed to use mortar and cladding on the installed iron fence. In order to avoid pollution, the iron fence should cover up the protective film during the interweaving operation. Once again, the iron fence should be cleaned, scratches corrected, and the surface should be kept smooth

工人在裝置鐵藝護欄前,有必要了解、和文明施工教育;施工人員有必要嚴格執行現場生產規章制度.施工人員進入現場時應戴帽,焊接人員有必要穿好絕緣鞋.嚴格遵守操作規程和一切規章制度.

It is necessary for workers to understand safety, environmental protection, and civilized construction education before installing iron guardrails; It is necessary for construction personnel to strictly follow the on-site safety production regulations. Construction personnel should wear safety helmets when entering the site, and welding personnel should wear insulated shoes. They should strictly follow the operating procedures and all safety regulations

施工前,有必要進行技術披露,不得違反規定,并遵守人員的指揮.留意一切用具,并保證它們沒有被正確使用.施工現場的材料要堆積規整,日常施工中的殘片要進行整理和整理,以便完成現場的整理作業.

Before construction, it is necessary to disclose safety techniques, not violate regulations, and follow the instructions of safety personnel. Pay attention to all safety equipment and ensure that they are not used correctly. The materials on the construction site should be stacked neatly, and the debris left over during daily construction should be sorted and organized to complete the on-site sorting operation

設置施工區域和危險區域的警示標志,并采納防護措施.焊接時應特別留意,準備消防設備,焊接結束時應立即查看現場.要采納各種有用措施,削減施工過程中發生的噪音,保證施工過程不干擾人們.

Set up warning signs for construction and hazardous areas, and take protective measures. Special attention should be paid during welding, prepare fire-fighting equipment, and immediately inspect the site after welding. Various useful measures should be taken to reduce noise during the construction process and ensure that the construction process does not interfere with people

為了保證鍍層與鐵制品外表之間良好的粘結力,在實施鍍層(電鍍)前,有必要盡可能去除鐵制品外表的氧化皮、爐渣、鐵銹痕跡、油脂、塵垢和水分.否則簡單使鍍層起泡、開裂、起皺、脫落.所謂處理是指用機械或化學或電化學辦法在電鍍前鐵藝護欄的外表缺陷.

In order to ensure good adhesion between the coating and the surface of the iron product, it is necessary to remove as much oxide skin, slag, rust marks, grease, dirt, and moisture as possible from the surface of the iron product before implementing the coating (electroplating). Otherwise, it will simply cause the coating to bubble, crack, wrinkle, and fall off. The so-called treatment refers to using mechanical, chemical or electrochemical methods to eliminate the surface defects of the iron guardrail before electroplating

感謝您的閱讀，此文的文章來源：濟南鐵藝護欄更多的內容和問題請點擊：http://www.jnghbxg.com我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is Jinan Iron Fence. For more information and questions, please click: http://www.jnghbxg.com We will continue to work hard to provide you with services. Thank you for your support!